DAEQUIP 3197H OPERATION MANUAL

DAEQUIP 3197H OPERATION MANUAL

SAFETY INFORMATION

THIS EQUIPENT IS DESIGNED BE OPERATED BY QUALIFIED PERSONNEL.IT SHOULD ONLY BE OPERATED AFTER READING THE INSTRUCTION MANUAL AND UNDERSTANDING THE SAFETY RULES

• WEAR SAFETY GLASSES

• DO NOT SMOKE NEAR THIS MACHINE

• USE IN A WELL VENTILATED AREA

• READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET

• IMMEDIATELY REPAIR ANY LEAKS IN THE MACHINE OR CONNECTORS

• IMMEDIATELY CLEAN UP ANY SPILLS

• DO NOT EXCEED THE PRESSURE FOR WHICH THE MACHINE IS SET.TO DO SO WILL CAUSE MACHINE DAMAGE, POSSIBLE PERSONAL INJURY AND VOID THE WARRANTY

1.UNCTIONING DESCRIPTION

The machine are equipped with wheels and the user can move them easily and direct himself nearby the car that need service (wasted oil-suction, new oil filling, boby-cleanning).

The functions are below explanation to use.

3197H Component name

1、eccentricity pot                 2、 one inch ball valve

3、oil pipelines                      4、support                     5、oil pipelines

6、fixed support                    7、vacuum meter           8、vacuum generator

9、glass jar                            10、Handle                    11、accessories pot

12、tub                 13、Wheel

Accessories:

1、operating manual             2、warranty card            3、one diameter: 8x8mm metal tube

4、one diameter:8x6mm plastic tube      5、one diameter: 8x6mm metal tube

6、one diameter:8x8mm plastic tube      7、one diameter: 8x10mm plastic tube

2 Technical parameters

Vacuum degree: negative 0-0.8PA

work pressure : 8-10PA

transparent window capacity: 10L

Oil storage capacity: 90L

medium: engine oilgear oil

N. W: 35kg

Oil suction pipe diameter: 5mm: 0.61m

oil pumping pipe diameter: 8mm: 1.61m

3 PACKAGE CONTENTS

Please inspect and look for damages from shipping when package is first received.if the unit is damaged in any way,please contact customer service and include pictures if possible.

In the package, you will find:

a)3197 H

b)Probes:5 pieces

c)OPERATION MANUA 1 pieces.

d) Tray 1 piece.

e) Chamber 1 piece

4 For the models with oil-display-transparent-tank it is necessary:

1) verify that the transparent-chamber has not been damaged during transporting(crack);

2)mount the transparent-chamber onto

the 701.tank and check it whether is appropriate seal;

3)Screw up the ring-nut by hands according the i(part with screwing-up by hands).

 

AIR-OPERATED            OIL-CHANGER                EQUIPPED                     WITH

OIL-DISPLAY-TANK

BASIC OPERATION FOR USE OF THE OIL-CHANGER

The depression of the chamber is a basic operation which allows an easier passage of the oil from the display chamber to the tank

1)COMPLETE VACUUM OF THE RESERVOIR CHAMBER

-Turn off all the cocks

of the aspirator and the cock connected to the probe.

-To connect the air-hose(8~10Bar)as position “2”, turn of the cock “3” (see fig.3) and start the depressurization of the tank up to 3/4of the scale of the vacuum-gauge “4”

(fig.3) see position of the index vacuum gauge, need time 3-4min.

2)MAX VACUUM OF THE RESERVOIR

Make sure that valve “2” is turned off and set the selector “1” on “B”.Now start the value of the reservoir for max 0,8Bar which is the max value of the acale of the vacuum gauge “4” (fig.3).turn off the cock “3” and release the air-hose from pos “2” (fig.4)

N.B. The air-filling must be made gradually.

The advantages

1)To reduce the air-consumption

2)A quicker depressurization

3)OIL-SUCTION

-Handle the cock “6” connected to the probe (fig * 0.4) and suck the oil and fill reservoir(max.capacity 61.)

NOTICE:During oil-suction use the more suitable probe “5” (fig .4)

TIME OF SUCTION WITH HOT-OIL

With probe diam.5mm.0.61/m

With probe diam.8mm.1.6l/m

It is possible to reach a vacuum of 0.75

bar

USE (TO WAYS)

A) To continuous compressed air connectby this way there is a constant depression capacity of the display tank,corresponding to 0.6 bar.

B)Device in autonomy (disconnected from the compressed air). In this way with the increase of the oil volume in the display tank to values near 51. the suction capacity (which reaches 6.5Lt and 1011.)-this in order to have a constant suction up to 10L.F

4)EMPTYING OF THE RESERVOIR AND TRANSFERING THE OIL INTO THE TANK

When oil is discharged from the transparent bowl into the lower reservoir without opening cock 1(fig.5)lt is not necessary to open the valve B only when the lower reservoir is depressurized

(when there is a vauum)

Notice:repeat the above operations to complete fill of the tank

5)Operation of connecting the oil

To place the machine to the location that is need to be connected the oil, Tuming off the cock “11” before the bowl is full. (fig.6)

WARNING!!! The ball valve “1” must be closed before the tank is

added air.(Fig.6)

a) Connect the drainage-hose “9” inside a recovery-dnam for exhausted oils, turn on the cock “10” in emptying position (Fig.6)

b)Connect the air hose as per pos. “7” turn on the cock “8” (Fig. 7)

c)Fill air into the tank (max 1 bar)

d)When I bar is reached tum off the cock “8” if it is necessary

ejWhen the emptying is finished close cock “10”.

6.SAFETY DEVICES

A safety valve will release pressure when pressure is 30PSI the ejection process.

7.ORDINARY MAINTENANCE

a) Check leakage of the machine regularly

b) Pipe to pipe connection should be close together

c) It’s necessary to release the waste oil as soon as possinle in case of the corroding of tank.

Notice:Don’t forget to turn off the faucet when the tank is empty

Solverwp- WordPress Theme and Plugin